Standard Printer Model US-2000X | US-2000XQ | US-7000X
The unique ESE printing table features four ball screws and three LM guides. This design precisely and firmly positions and supports the print table, allowing even squeegee pressure across the entire width of the print table and resulting in an accuracy of 12.5 microns and wet printing repeatability 25.5microns @ 6 sigma
Model: US-2000X | US-2000XQ | US-7000X
Product Description
The unique ESE printing table features four ball screws and three LM guides. This design precisely and firmly positions and supports the print table, allowing even squeegee pressure across the entire width of the print table and resulting in an accuracy of 12.5 microns and wet printing repeatability 25.5microns @ 6 sigma
The printing-table conveyor system does not have a fixed front or rear rail as with conventional printers. Instead, adjustable front and rear rails position the PCB directly over the center of the table, allowing consistent, high-precision paste printing for components down to 01005 (0402 metric) and pitches to 0.012 in (0.3 mm).
ESE’s adjustable stencil rails eliminate the need for expensive stencil adapters that are time-consuming to set up and can get lost, bent or damaged. An easy-to-use plunger mechanism enables quick changeover of stencils, increasing productivity.
The incoming and outgoing conveyor system features patented one-touch width adjustment using LM guides instead of ball screws, for quick, trouble-free operation.
Review Standard Printer Model US-2000X | US-2000XQ | US-7000X.